Cli-mate CLI-AP30 Instructions d'exploitation télécharger pdf (Page 10)

8 INSTALLATION AND OPERATING INSTRUCTIONS

CLEANING AND MAINTENANCE

Before carrying out any maintenance or cleaning of the unit, make

sure that the power to the unit is turned off and power cord is

unplugged from the power socket.

External cleaning of unit:

• Do not clean unit with any abrasive cleaning agents or solvents

• Do not apply any water directly to the unit of cleaning

• Only use a soft clean cloth for all cleaning purposes

• Clean the air inlet and outlet with a dry cloth, soft brush or

vacuum cleaner

CLEANING THE PRE-FILTER

It is recommended that the Pre-ﬁlters (the removable white layer)

are cleaned every 1-2 weeks of unit operation, depending on the

air quality of the room

To clean the Pre-ﬁlter:

1. The removable Pre-ﬁlter is attached by Velcro. Gently peel away

the Pre-ﬁlter.

2. Fill the sink with lukewarm water and gently hand wash the

Pre-ﬁlter under the water for 2-3 minutes or until it is

completely clean.

3. Rinse the Pre-Filter with clean tap water.

4. Use a towel to remove any excess water from the Pre-Filter

5. Allow the Pre-ﬁlter to dry for 12-24 hours

6. When the Pre-ﬁlter is completely dry, re-attach and place back

into the air puriﬁer. Note: When placing the ﬁlters back into the

air puriﬁer, ensure that the white belts are facing outwards and

that the Pre-ﬁlters are facing towards the air inlet

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Cli-mate CLI-AP30 Instructions d'exploitation Page 10